eBay Classifieds » All ads » Jobs » 

engineer in Knoxville

(1-24 of 24 ads)

View as:
Categories
  1. Sponsored Link 5
  2.  
  1. Quality Engineer - automotive

    Salary Range: 70-75k Relocation:   Yes Type of products: stampings & welded assemblies Qualifications: 4 year degree preferred knowledgeable of TS16949, ISO14001 and other automotive standards       Develop familiarization with Quality and Environmental Management Systems and manufacturing processes Problem-solve using advanced statistical techniques (probability, capability, etc.) Audit systems for compliance and Continuous Improvement opportunities Seek process improvement and cost ...

  2. Quality Engineer - Pay Up to $80K DOE

    Senior leader representative of the company quality assurance system.  Implements and audits effectiveness of manufacturing processes and procedures to ensure continuous production of STAMPED AND WELDED AUTOMOTIVE products that meet our customer Quality requirements.  Creates an operational culture of team member engagement to prevent or eliminate outflow of defects by performing the following job functions either personally or through company Quality team members. As the Quality Operating Systems ...

  3. Support Services Engineer-paid relo to Morristown, TN-fzsmar

    We are looking for someone with a BSME or BSIE with experience in manufacturing technical support. Primary functions of the Support Services Engineer is to ensure that measurement methods and systems are accurate, efficient, and satisfy the measurement requirements based on engineering standards. Program and Troubleshoot Measurement Equipment including: Scanning CMMs, Roughness Gauges, Contour Systems, and Form Measurement Systems. Develop and Improve Measurement Methods. Select and Implement ...

  4. Engineering Manager- Medical Device

    Key Responsiblity Areas are as follows: Performs research, analysis, design and development of lean manufacturing processes including production flow, assembly methods and production equipment for new and existing projects. Assists with process design changes Modify equipment and process control system to support manufacturing Support Manufacturing and Production staff to solve technical, quality and production problems to ensure consistent product flow, and make recommendations to senior staff ...

  5. Sr. GUI Engineer-MFC, XAML, TCP- Alcoa, TN

    STI-ECD-520-(A) Sr. GUI Engineer-MFC, XAML, TCP- Alcoa, TN Location: Alcoa, TN Domain: Engineering Job Type: Direct Job Responsibility: Consulting with electrical and mechanical engineers to ensure a successful system design Independent software design from loose specifications Working with manufacturing and an international service team to diagnose and repair problems Complete software system design and implementation including concept, specification, prototyping, development, testing, ...

  6. Site Electrical Engineer - paid relo to Etowah, TN - bzs6322

    The company plant houses two major furnaces and two glass mat lines.  Molten glass is produced on both furnaces and converted to a continuous filament fiber. The fiber is chopped to a prescribed length and then used in various processes in the building industry.   Relocation assistance is available for those who qualify under our relocation policy.     Responsibilities:   • Responsible for maintenance and upgrades for site electrical infrastructure, power distribution and PLC platforms • ...

  7. Product Engineer (Entry Level)

    Job Purpose/Scope:  The Product Engineer is responsible in assuring the consistency of drafting practice and formats on the part prints issued to manufacturing, vendors and customers.  The Product Engineer is responsible for developing designs and drawings for various products while maintaining and updating the design standards.   Essential Job Duties/Responsibilities: Works closely with Manufacturing and sales to prepare and maintain track work related assemblies and component drawings that are ...

  8. PLANT QUALITY ENGINEER

    Experience: Mid-Senior level Functions: Quality Assurance, ISO/TS/VDA Quality Systems, APQP, Product Engineering, Program Management  Industry: Automotive  Job Description Senior leader and Management representative of the company quality assurance system.  Implements and audits effectiveness of manufacturing processes and procedures to ensure continuous production of STAMPED AND WELDED AUTOMOVE products that meet our customer Quality requirements.  Creates an operational culture of team ...

  9. Sr. Program Manager/Method Cost Estimating Engineer

    Job Description: Responsible for overall management of new model programs to ensure a successful outcome.  Plans Cost, Capacity, and Investments.  Advises program team regarding new projects, tasks, and operations.  Requires at least 10 years experience in the Automotive Supplier Field.  Has advanced understanding of automotive press working technologies, structural part assemblies and modular automotive assembly.  Familiar with advanced manufacturing concepts, best practices, and procedures within ...

  10. Controls Engineer-PLC / SCADA Design

    CONTROLS ENGINEER- PLC / SCADA / HMI DESIGN Well-respected Tier 1 Automotive manufacturer seeks experienced Controls Engineer to join team. Must have experience designing and programming PLC / SCADA / HMI systems in a high speed manufacturing operation. This is an excellent opportunity with a first class organization. Must fill this position at once. Quick hiring process!!!! REQUIREMENTS: AT LEAST 5+ YEARS OF EXPERIENCE AS A CONTROLS ENIGNEER EXPERIENCE PROGRAMMING AND DESIGNING PLC SYSTEMS ...

  11. Foundry Engineer needed Apply Today!

    Position Title           Foundry Engineer           Relocation               Yes   Location                  Morristown TN   We are looking for an engineer with mechanical and electromechanical design experience  in manufacturing.   The Foundry Engineer researches, plans, and designs mechanical and electromechanical products and systems, and directs and coordinates activities involved in fabrication, operation, application, installation, including repair of mechanical or electromechanical ...

  12. Manufacturing Engineer

    HRC 11-04Tier 1 automotive supplier in E.TN has immediate need for a Manufacturing Engineer. Will be responsible for improving manufacturing processes in machining and metal working processes as well as ensuring accurate inventory for tooling and spare parts. Will work with CMMs, gauges, and other measurement systems in addition to creating work instructions, and working on cost reduction initiatives on the plant floor.Qualified candidates will have BS Engineering degree and at least 5 years ...

  13. Process Engineer

    The Process Engineer will utilize their expertise in process design and suggest improvements of manufacturing, thereby increasing productivity and reducing over manufacturing costs. Responsible for identifying, designing, planning and directing assigned projects in the area of new or modification of facilities, new or modified machinery used in the manufacturing process. Write capital procurement and justifications. Create and maintain operations budget. Utilize Lean concepts to reduce costs. This ...

  14. Product Engineer

    Product Development Engineer A leading manufacturer of automotive components supporting the OEM and aftermarket sectors has the immediate need for a Product Development Engineer for their Knoxville, TN location. Responsibilities: • Assist with material quote breakdowns • Prepare preliminary and final bill of materials • Prepare material and vendor set up requests • Assist in evaluation of new material and suppliers • Develop cost saving ideas related to material sourcing and supply chain • ...

  15. Industrial Engineer

    The Industrial Engineer will utilize their expertise in process design and suggest improvements of manufacturing, thereby increasing productivity and reducing over manufacturing costs. Responsible for identifying, designing, planning and directing assigned projects in the area of new or modification of facilities, new or modified machinery used in the manufacturing process. Write capital procurement and justifications. Create and maintain operations budget. Utilize Lean concepts to reduce costs. This ...

  16. Foundry Engineer #2142

    We are looking for an engineer with mechanical and electromechanical design experience in manufacturing. Employer paid relocation along with fantastic pay and benefits can be expected! The Foundry Engineer researches, plans, and designs mechanical and electromechanical products and systems, and directs and coordinates activities involved in fabrication, operation, application, installation, including repair of mechanical or electromechanical products and systems by performing the following duties: ...

  17. Support Services Engineer-paid relo to Morristown, TN-fzsmar

    We are looking for someone with a BSME or BSIE with experience in manufacturing technical support. Primary functions of the Support Services Engineer is to ensure that measurement methods and systems are accurate, efficient, and satisfy the measurement requirements based on engineering standards. Program and Troubleshoot Measurement Equipment including: Scanning CMMs, Roughness Gauges, Contour Systems, and Form Measurement Systems. Develop and Improve Measurement Methods. Select and Implement ...

  18. Substation Physical Designer/Engineer - #241, Knoxville, TN

    Physical engineer/designer responsible for the development of General Arrangements for Substations, Equipment Plans, Elevations, and Sections, Control House Layouts, Grounding design, Conduit and cable design, Creation of Bills of Materials, and Cable schedules utilizing Microsoft Office and MicroStation software. RESPONSIBILITIES/DUTIES: Substation Physical design, occasional site visits and station walkdowns, estimating, and attending project meetings. Must be able to complete assignments within ...

  19. Machining Engineer

    HRC 11-04We are currently working on an Machining Engineer search for an international Tier 1 automotive company in E.TN. Qualified candidates must have BS Engineering degree along with 5+ years experience in high volume manufacturing. Knowledge of CNC programming is preferred and PLC troubleshooting experience is a plus. Must have experience working with TS-16949 requirements. This is a hands-on position working closely with production equipment analyzing data; designing jigs & fixtures; designing ...

  20. Polymer Applications Development Engineer   124.14LR

    :: If you meet the qualifications listed below and would like more information contact Larry at 815-756-1221. Attach resume when responding to this posting :: The Engineer will be responsible for developing polymer technologies. 0-20% travel Qualifications: -PhD in polymer science, materials science, chemical engineering, or related -PhD chemist with 3-20 years of experience with polymer extrusion OR a PhD hot melt adhesives chemist with 3-20 years of experience -Strong working knowledge in a broad ...

  21. Sales Engineer

    This job is not in TN, but in the Lexington, KY area. I'm looking for somebody who will relocate to Lexington, who has an engineering degree, and who has at least a tiny bit of sales experience and a desire to do sales.    The salary for this sales engineering job is $60,000 - $75,000. It would be a base salary. It's a great company to work for. Their sales are booming. The industry is automotive.   This is a hybrid sales/engineering job. Having an engineer degree is a must, any kind. The type ...

  22. Product Development Engineer de

    New Product Development Manager Location: Knoxville, TN Relocation: Paid by company Compensation: $100-125k base salary + Bonus Description: Strong-growth, industry leading, global manufacturer has an immediate opening. The New Product Development Manager is a leadership position that drives new product revenue through the implementation of innovative products and materials. This position will have experience managing the product development stage gate process using effective project management ...

  23. Injection Molding Process Engineer - Knoxville, TN

    Seeking degreed engineer with 3+ years experience with injection molding process development. Products will include: ** Door Lamps ** Fog lights ** Instrument Panel lights ** Headlights ** Signal Lights ** Tail lights ** Emergency vehicle lighting Candidate will: ** Participate in design approval process for new products ** Select appropriate materials ** Develop Cost estimates ** Conduct field trials ** Develop manufacturing process; design, build, or acquire required ...

  24. Manufacturing Engineer

    Tier 1 automotive supplier in E.TN has immediate need for a Manufacturing Engineer . Will be responsible for improving manufacturing processes in machining and metal working processes as well as ensuring accurate inventory for tooling and spare parts. Will work with CMMs, gauges, and other measurement systems in addition to creating work instructions, and working on cost reduction initiatives on the plant floor.Qualified candidates will have BS Engineering degree and at least 5 years Engineering ...