eBay Classifieds » All ads » Jobs » Construction & trades » 

welding in Knoxville

(1-16 of 16 ads)
View as:
Categories
  1. Safety Officer at hth companies

    Motivated to learn new skills and trades. Hth companies provides construction services to commercial and industrial customers throughout the Midwest....

  2. Garage Technician at Ameren

    Must pass the Construction & Skilled Trades (CAST) aptitude test, written automotive mechanic and hand-on test requirements of company....

  3. Garage Technician-Floater at Ameren

    Must pass the Construction & Skilled Trades (CAST) aptitude test, written automotive mechanic and hand-on test requirements of company....

  4. Communication & Signals Management Training Program - External at CSX

    Knowledge of construction methods, design, installation according to engineering principles. Bachelors degree from an accredited institution in Electrical...

  5. Park Technician 1 - Roving Crew at Metro Parks, OH

    Knowledge of safety practices and procedures, basic building and grounds maintenance methods, principles of construction, equipment operation and construction...

    Ads
    1. Tool & Die Technician - Pay Up to $25/Hour DOE

      Prominent Company seeking highly qualified Tool & Die Makers for all shift positions. Great pay, $25.00/hour to start with excellent benefits.Responsible for the repair and maintenance of dies for a safe, clean, productive and economical operation that fully supports press production.ESSENTIAL DUTIES & RESPONSIBILITIES:Repair and Maintenance of Dies. Experience working with large progressive, ...

    1. Master and Journeyman Electrician at GemCare Inc. Staffing

      Ability to use hand and power tools applicable to trade. Ability to install and maintain motors, welding equipment, lighting fixtures, generators, circuit...

    1. Pipe/Tube Benders

      Labor Ready in Knoxville, TN is looking for multiple Welders with Pipe Fitting Exp. ***JOB START DATE : October 19th ( 40 - 50 hours per week per employee ) This will be a local job located near downtown Knoxville. Job will last approximately 2 weeks, but could go a bit longer or shorter depending on out customers schedule. ( 40 - 50 hours per week )  ***General Welding. Pipe fitting / ...

      Contract Allowed

    2. pipe fitter

      Labor Ready in Knoxville, TN is looking for multiple Welders with Pipe Fitting Exp. ***JOB START DATE : October 19th ( 40 - 50 hours per week per employee ) This will be a local job located near downtown Knoxville. Job will last approximately 2 weeks, but could go a bit longer or shorter depending on out customers schedule. ( 40 - 50 hours per week )  ***General Welding. Pipe fitting / ...

      Contract Allowed

    3. Welders and Pipe Fitters

      Labor Ready in Knoxville, TN is looking for multiple Welders with Pipe Fitting Exp. ***JOB START DATE : October 19th ( 40 - 50 hours per week per employee ) This will be a local job located near downtown Knoxville. Job will last approximately 2 weeks, but could go a bit longer or shorter depending on out customers schedule. ( 40 - 50 hours per week )  ***General Welding. Pipe fitting / ...

      Contract Allowed

    4. Pipe cutter and Fitters

      Labor Ready in Knoxville, TN is looking for multiple Welders with Pipe Fitting Exp. ***JOB START DATE : October 19th ( 40 - 50 hours per week per employee ) This will be a local job located near downtown Knoxville. Job will last approximately 2 weeks, but could go a bit longer or shorter depending on out customers schedule. ( 40 - 50 hours per week )  ***General Welding. Pipe fitting / ...

      Contract Allowed

    5. TIG Welder

      Job Description: Use hand-welding equipment to weld or join metal components or seams of fabricated aerospace metal products.Responsibilities/Duties:Responsible for TIG welding stainless steel and Inconel sheets 0.035 inch to 0.25 inch thick together.Capable of reading and interpreting blueprints and is current on understanding weld symbols.Brainstorms ideas for and creates tooling to do new ...

    6. Tool & Die Technician - Pay Up to $25/Hour DOE

      Prominent Company seeking highly qualified Tool & Die Makers for all shift positions. Great pay, $25.00/hour to start with excellent benefits.Responsible for the repair and maintenance of dies for a safe, clean, productive and economical operation that fully supports press production.ESSENTIAL DUTIES & RESPONSIBILITIES:Repair and Maintenance of Dies. Experience working with large progressive, ...

    7. Pipefitter/Welder

      Experienced Pipefitter/Welder needed to start in Knoxville, must be comfortable working in confined spaces. Must be able to weld carbon steel. Compensation: $20/hour DOE -Must have a minimum of 5 years' welding experience.-Must be able to MIG and STICK weld.-Must have own PPE (Steel toe boots, hard hat, safety glasses, and safety vest).-Valid Driver's License/photo ID and reliable ...

    8. Tool & Die Technician - Pay Up to $25/Hour DOE

      Prominent Company seeking highly qualified Tool & Die Makers for all shift positions. Great pay, $25.00/hour to start with excellent benefits.Responsible for the repair and maintenance of dies for a safe, clean, productive and economical operation that fully supports press production.ESSENTIAL DUTIES & RESPONSIBILITIES:Repair and Maintenance of Dies. Experience working with large progressive, ...

    9. Welder/Fabricator

      Opening welders in the Knoxville, TN. Must be able to MIG, TIG, stick weld and fabricate. Compensation: $16-$18/hour DOEMUST BE LOCAL TO THE KNOXVILLE ARE BE CONSIDERED FOR THIS POSITION.Must have a minimum of 5 years commercial or industrial welding experience.Must be able to MIG, TIG, and STICK weld.Must have own PPE (Steel toe boots, hard hat, safety glasses, and safety vest).Valid Driver ...

    10. Industrial Pipefitter Journeyman

      Pipefitter JourneymanStart Date: TBDPay Rate: $18-21 (depending on experience)Hours: Monday – Thursday (7AM – 5:30PM) – 40 hours/wk until further notice Renfrow Brothers, Inc. Industrial Contractors is searching for experienced pipefitters to fulfill duties at the newly opened Tennessee Division Office and Fabrication Shop. Job Description:We are looking for someone who enjoys working in a ...

    11. Pipe Welder

      Pipe WelderStart Date: ASAPPay Rate: $18-21/hour (depending on experience)Hours: Monday – Thursday (7AM – 5:30PM) 40 hours/wk until further notice Renfrow Brothers, Inc. Industrial Contractors are searching for pipe welders to fulfill duties at the newly opened Tennessee Division Office and Fabrication Shop. We are also looking for any and all interested welders for any future field work. ...

    12. Structural Welder

      Structural WelderStart Date: ASAPPay Rate: $16-$20/hour (depending on experience)Hours: Monday – Thursday (7AM – 5PM) and Friday (7AM – 11AM)Renfrow Brothers, Inc. Industrial Contractors is searching for a structural welder to fulfill duties at the newly opened Tennessee Division Office and Fabrication Shop.Job Description:We are looking for someone who enjoys working in a fast-paced and ...

    13. Pipe Welder

      Experienced Pipe Welder needed to start in Knoxville, must be comfortable working in confined spaces. Must be able to work with carbon steel.Compensation: $20/hour DOE-Must have a minimum of 5 years' welding experience.-Must be able to MIG and STICK weld.-Must have own PPE (Steel toe boots, hard hat, safety glasses, and safety vest).-Valid Driver's License/photo ID and reliable transportation ...

    14. Tool & Die Technician - Pay Up to $25/Hour DOE

      SUMMARY: Responsible for the repair and maintenance of dies for a safe, clean, productive and economical operation that fully supports press production. ESSENTIAL DUTIES & RESPONSIBILITIES: Repair and Maintenance of Dies. Experience working with large progressive, transfer and deep draw dies. Ability to TIG weld. Rework of damaged components in a timely manner. Maintain a clean and safe ...

    15. Equipment Installer - Commercial Kitchen Equipment

        Ameritech Facility Services is seeking Full-time kitchen equipment installers willing to travel out of state to work with our customers repairing and remodeling our large restaurant chain customers. Electrical experience is a plus. This position REQUIRES travel, nights and the use of YOUR tools. We are a nationwide company and have opportunities if you are willing to travel for long ...

      1. Outside Sales Associate at Airgas Inc.

        Represents the company at trade association meetings and Trade Shows to promote products. Makes application recommendations of welding and positioning equipment...

      2. Structures Senior Technician at Michael Baker International

        5 years’ experience in construction, renovation or maintenance. Prefer experience working with diverse cultures and various trade skills in an austere,...

      3. Facility Maintenance Mechanic at Bronco Wine Company

        Fabrication / construction / installation. Pipe fitting, painting, sandblasting or any other maintenance / construction trades work which may be required or...

      4. Mechanical Operations Training Program-External at CSX

        2 or more months of experience required in Manufacturing or Industrial setting, Transportation, Logistics, Skilled Trades (building, construction, electrical,...

      5. Trainmaster External Trainee - January 11, 2016 at CSX

        1 or more years of supervisory experience in Manufacturing, Transportation, Logistics, Rail Operations, Skilled Trades (building/construction, electrical,...